Washing the pipe clean
Hydro jetting
A cable opens a hole through a clog. A jetter pushes a hose with a nozzle up the pipe and sprays water backward against the walls, washing out what has built up.
Cable head and jetting nozzle
When jetting makes sense
Good fits
- Kitchen lines lined with years of grease.
- Fine root hair left behind after a cutter has removed the main mass.
- Sand, silt or scale in a line that keeps slowing down.
- A clog that comes back within weeks of being cabled.
Poor fits
- Pipe a camera has shown to be cracked, offset or collapsed. Water under pressure can make a weak spot worse.
- A solid object, such as a toy, that needs to be hooked out.
- Lines with no cleanout or safe access for the hose.
What to expect on the day
The jetter is a pump and a hose reel, often on a trailer or in a van, so it needs to park near the cleanout. Expect the hose to run from the driveway into the basement or to a cleanout in the yard.
Most companies want to see the pipe on camera first. If they skip that step, ask why: jetting a broken line can wash soil into it.
Water flows back toward the opening while the nozzle works, so the area around a basement cleanout gets wet. Move boxes and anything stored on the floor.
Questions to ask
- Will you run a camera before and after, and can I see the footage?
- Is jetting needed, or would a cable do for this clog?
- What happens to the price if the nozzle can't get past a problem section?
Drain still backing up?
Keep water out of it until someone has looked. A blocked pipe only fills further each time a tap or toilet runs upstream of it.
Talk to a drain company
Say which drains are slow, where water came up and whether it has happened before. Ask for the price in writing before anyone starts.
Call (517) 489-3399Calls may be recorded. See who pays for referrals and what happens to your details.